Home > Hot Tub > Hot Tub Control Panel Blank

Hot Tub Control Panel Blank

Contents

Register a new account Sign in Already have an account? Hope not. Examine the panel to see if any moisture is inside the display. Don't Have an account? http://atomirc.net/hot-tub/hot-tub-control-panel-not-working.html

Anyone else on this thread have any advice? Ask Your Own Pool and Spa Question Expert: TheHotTubGuy replied4 years ago. hope this helps. Skip to main content Menu Pools Hot Tubs Bathrooms Service Pool Renovations Water Care Outdoor Living Parts and Accessories Store HomeSupport PostsSpa pump not responding to buttons but still comes on Discover More

Hot Tub Control Panel Blank

And it seems to me it might be the problem after tracking every wire. I feel like something must have happened during the course of removing/installing the pump to cause this. Two weeks ago i got out of the hot tub and my girlfriend unplugged a radio we put in the window and the radio flashed tripping the gfci tripped. The GFCI Trips When I Call For Heat Or Turn On The Hot Tub The number one cause for GFCI trips is a shorted heating element.

SnA or SnB = This means that sensor A or sensor B is bad or has a poor connection to the circuit board. Would a bad pressure switch do it? The pump has to be running for your spa to heat, so if the pump does not come on the problem may be with pump itself. Hot Tub Control Panel Locked Ask a Question or Comment Cancel reply Message *Name * Email * Phone Number * City * I agree to participate in this conversation via email.

Look in the heater if possible as well. NOTE: A reading from L1 to neutral does not indicate a short. Please refer to this link to confirm that it was wired properly. water was low but not that low.

Check the temperature has not been locked. Hot Tub Lights Not Working Share this post Link to post Share on other sites Gus1 0 Newbie Members 0 4 posts Posted July 4, 2010 · Report post First of all thanks for the I recently had the circuit 11/10/2016 11/10/2016 rickspaserv I have a new issue with my Caldera Spa. To determine which component is causing the problem, unplug the components one at a time and turn the breaker on.

Top Side Control Panel Not Working

You can change this preference below. https://spacare.com/circuitboardtroubleshooting.aspx You can change this preference below. Hot Tub Control Panel Blank Giving me a headache lol! No Display On Hot Tub Sign Up Now Cancel Search How-Tos Your Projects Your Projects Forums search Hi 0 | Logout Connect with Facebook Login Sign Up Home / Exterior Home Improvement / Pools, Spas, Hot

if your stil buying a mother board shop around I just found one for 360.00 new. What could have happened? Fill out my Wufoo form! More information regarding "Spa Won't Heat" I'm Getting Error Codes Or Blinking Dots There are several different error codes that are used by many different manufacturers. Hot Tub Control Panel Codes

They tried a few other things which didn't work either and then opened the mother board up and found ants had gotten in and he thinks that they may have shorted I resoldered it and honestly it isn't a good thing to do I know. Thanks again for the help Hi Iv been an Arctic spas service tech for 10 years. If I press prog it will display the time for a breif second then goes blank.

I see that power is coming to the main circuit board. Hot Tub Control Panel Replacement Turn off the power for about an hour and then restore the power to the unit. Spacare.com 888-772-9887 Technical Assistance 405-622-4950 0 Item(s) | Total: $0 Home Shop SpaCare.com Spa Part Index Circuit Board Repair Spa Covers Spa & Hot Tub Covers Spa Cover Lifts

Ask an Expert Home Improvement Questions Pool And Spa Repair How JustAnswer Works: Ask an Expert Experts are full of valuable knowledge and are ready to help with any question.

COOL = Spa water is more than 20° F cooler than the temperature set point. If anyone has a similar issue in the future I definitely recommend properly checking the bus fuses first by removing them from the board and testing for continuity. Try disconnecting the remote panel from the sensor loom inside the skirt panel. Hot Tub Buttons Not Working Now it trips imediately when reset..Sounds like the heater is bad to me but more test tomorrow.

Sign in 11 Loading... Licensed electricians have been known to install GFCI breakers incorrectly. The readings above are normal so please do not send your circuit board in for repair with the above readings. 4. Use a screwdriver to turn the bulb approximately 7 mm to remove and replace the bulb. (Needle-nose pliers may also be useful.) Bubbletubs Ltd Unit 9 Wombourne Enterprise Park Bridgnorth Road

We repair Hot Tub circuit boards! Thanks so much Louise Hi Louise, I'm having the exact same problem with my 2004 arctic spa summit.The local dealer gave me a couple of points to check and turns out This will tell. Or could it be something else?

The first step is to simply reset the breaker. Resetting the spa by turning off the power, waiting and turning it back on is likely to resolve the issue. Reconnect and power up. Jerry and other Pool and Spa Specialists are ready to help you Ask your own question now Customer: replied3 years ago. Now with the remote panel disconnected all of the pumps are working properly once again!!

Breaker is on gfci which isn't in line with hot tub is reset so I'm clueless to what the problem could be. Dry fire of heater from ice that may have still been in the system blocking the lines? Turn power back ON.How do I replace the Topside Bulb Replacement (on Balboa topsides):Another panel problem may be burned out backlighting bulbs. Professional help is normally required if replacing the pump does not remedy the problem.

You would probably want to start with the topside first, because it will be cheaper. Please take all necessary precautions before attempting any repairs. I left out of town the next day and didn't come back for two days, when I noticed a storm had knocked my cover off and my tub was showing a Make sure that a rodent has not chewed through the cable.