Check that the sound card was detected properly Your sound card may not have been detected properly. Zinoune Share on Facebook Tweet on Twitter tweet Updated 19/04/2014 : One of the common issues facing Ubuntu users after installing or upgrading Ubuntu is the no sound problem, there are The command should now be printed in the Terminal without errors. Puff! navigate here
The only problem I had was when I rebuilding the alsa drivers with alsa-source. On some Toshiba laptop models, setting the PCM channel volume higher than 70% in alsamixer, may result in clipping (for example: very "harsh" and distorted sound both on the internal speakers While the outcome of running the suggested command string below may indeed fix certain sound problems, be aware that it is a very blunt approach and could result in unintended consequences. It might solve your analog audio output issue.
You can get a list of all PCMs with the -L (uppercase, not lower) option, but it outputs so much stuff it's not shown in this document. Thanks in advance Galto Reply Enas Kapoios says April 19, 2015 at 6:43 pm Dear Abhishek, Let me inform you that your First Alternate method worked like a charm in Ubuntu If you see any solutions that involve changing the whole system's configuration, you probably don't have to follow them. 4. I always had sound until today.
Once you know the right driver, and have installed it on your computer, you can load it with modprobe and test whether it loaded using lsmod. John Goold St. Reply Harry Pennington says February 17, 2015 at 6:07 pm ok when check my sound I get a blank screen but since doing the fix problem I hear in my log Ubuntu No Sound Output If you see something else i.e.
If so, specifying the card number given by aplay -l to start alsamixer (for example alsamixer -c 0 ) can make it appear. Last edited by mörgæs; April 1st, 2012 at 06:30 AM. I am running Ubuntu 12.04 however (not 13). https://help.ubuntu.com/stable/ubuntu-help/sound-nosound.html If such an option exists, make sure BIOS option "Speakers and Headphones" is set to "enabled" If you happen to have two sound-cards installed in your pc, one integrated into the
You saved my day. Ubuntu 15.10 No Sound DO NOT run this. Removing ~/.config/pulse directory, followed by reboot, fixed my problem in Ubuntu 14.04. thanks for help sam Reply Abhishek Prakash says August 15, 2013 at 9:23 am Try killall pulseaudio Reply ericek111 says August 18, 2013 at 3:36 pm Thaaaanks, man!
Connect your PC to the Display via HDMI cable and enable the display with xrandr. https://help.ubuntu.com/community/SoundTroubleshootingProcedure Reply Abhishek Prakash says July 6, 2013 at 12:12 pm Can you try this: https://itsfoss.com/how-to-solve-microphone-not-working-in-skype-quick-tip/ Reply frmdstryr says May 25, 2013 at 3:09 pm Thanks! Ubuntu 15.04 No Sound This can be fixed by muting or setting volume to 0% on item Mic. Ubuntu 16.04 No Sound Reply Nate says December 8, 2013 at 6:35 am I know my audio controller is a Lynx Point-LP HD Audio Controller, which should be supported, but I don't know where to
The fix was to reinstall Alsa and Pulse audio drivers and then reloading Alsa […] Reply Ubuntu - no audio after upgrade to 13.10 [closed] | Zuelke Answers says: December 6, http://atomirc.net/no-sound/chrome-no-sound-ubuntu.html Reason: Pointer to new thread Adv Reply June 29th, 2006 #2 LordRaiden View Profile View Forum Posts Private Message Frothy Coffee! Troubleshooters.Com, Linux Library, and Linux Sound Studio Present: Troubleshooting Linux Sound Copyright © 2013 by Steve Litt See the Troubleshooters.Com Bookstore. Checking the HP option under widget control in the Playback Switch (Node[0x14] PIN in the ALC892 codec, for instance) can sometimes improve audio quality and volume significantly. Ubuntu 16.04 Sound Not Working
Huge fan of Agatha Christie work. But I finally tried looking at the hardware settings, because I have a GPU installed with an onboard sound device. If the test is successful, edit/create /etc/asound.conf to set HDMI as the default audio device, reboot, and audio should now work. (Is there a better way to do this?) cat /etc/asound.confpcm.!default http://atomirc.net/no-sound/ubuntu-14-04-no-sound.html For some reason my sound is no longer working.
Do you have any recommendations what I can try to get sound working? Ubuntu No Sound Hdmi Enjoy the sound of music :) John Whitehead says October 21, 2013 at 2:27 pm Yes. This will likely create problems for users of the other flavors of Ubuntu -- a Kubuntu user would not want the Unity interface installed.
I was able to install cinnamon and get my desktop back. Boot Knoppix. Switch to the "Playback" tab and increase System sounds volume to 100%. Linux No Sound Output So you can use arecord to record a .wav file, and you can also use the -l flag to list input devices, as follows: [email protected]:~$ arecord -l **** List of CAPTURE
Check that the right sound device is selected Some computers have multiple "sound devices" installed. If you are using Ubuntu 12.04 LTS (Precise Pangolin) or later, try this first: killall pulseaudio; rm -r ~/.config/pulse/* ; rm -r ~/.pulse*wait ten seconds, then run this: pulseaudio -k #1B. I keep my system up to date, so I'm not sure which update caused the problem. weblink My Husband and I are avid readers.
Introduction I love Linux, but at certain times I curse it. The following solution should work onÂ Ubuntu 14.04, 13.10, 13.04 Raring Ringtail, 12.10 and any older release of Ubuntu. 1. OpenAL: No sound in applications that use OpenAL Openal defaults to pulseaudio, to change the order, add the following configuration to /etc/openal/alsoft.conf: drivers=alsa,pulse VirtualBox: Virtual machine has no sound If you Regardless, you get the credit - we can hear our PC again.
Move on to step 2.(2) Type this into the shell: Code: lspci -v Success - At this point, you should see your sound card listed. If the utility detects a plug and play sound card, it automatically tries to configure the correct settings for your card. Press Esc when finished. But if you look in /var/log/apt you'll find a handy log file telling you which packages were removed, and you can add them back with apt-get.
When you first reboot your computer, there's usually a key sequence listed telling you how to enter the BIOS configuration screen. On all the music players I know of, you can configure the sound engine, to any module that is available.The setting is usually found under something like Tools >>> Configure >>> Step 16 If the HDMI output of your motherboard/sound card is not working or stopped working, and have already enabled and unmuted it in alsamixer, try the following HDMI troubleshooting procedure: I use: killall pulseaudio sudo alsa force-reload kmix and tray icon work fine.
Try making positive Mic Boost and raising Capture and Digital levels higher; this make make static or distortion, but then you can adjust them back down once you are hearing something Thanks Reply Abhishek Prakash says September 15, 2013 at 10:21 am welcome. Go onto Saving Sound SettingsFailure -You have two optionsMove on to Getting the ALSA drivers from a *fresh* kernel. Join Date Dec 2005 Location Mississauga, ON, Canada Beans 245 DistroKubuntu 6.10 Edgy Comprehensive Sound Problem Solutions Guide This thread, dating back to 2006, has now served its purpose.
A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'.